Epoxy Resin Times & Depths

We have many different types of Epoxy Resin and what one to use depends on what you are doing with it. We have Epoxies that can cast and Epoxies that coat and even some that do both!

Epoxy needs to generate enough heat to set, so if you do a shallow pour with an Epoxy that is meant for casting the resin will never set. On the opposite side if you cast with a resin that is meant for coating or shallow pours the epoxy can generate so much heat that it will smoke up and possibly crack. This is why it is so important to use the right resin for your application. The setting times of resin are tested at 25 degrees C with the deepest pour tracked in a controlled lab. We have epoxies that fully set in 2 days and some that set in 10. In the table below it shows working time, initial cure, full cure and depth. If you have any questions please don't hesitate to call us on 0444 568 646.